If this is the case, move the choke lever immediately and continue the process until ignition happens. You may need to adjust your choke depending on how the engine starts.

You’ll have to pull it four times before you can attempt again. To start the engine, pull out the starting handle. When using a cutting attachment, position it against the deflector on the other side of the weed eater’s handle from where your hand is gripping the starter handle.Īlso, make sure your cutting attachment is only used on long grass and not on anything else, such as a rock. Set the weed eater on the ground, with the beginning handle out of reach of your foot. While flying, If your model has a key that allows for compressing the throttle and letting off of it quickly, ensure you are taking advantage of this prior to launch. While the engine is still hot, fill up the balloon with fuel by pressing it down. Setting Choke Controlīefore start-up, make sure the choke control is set somewhere in between half to three-quarters of the choke position. When the engine is cold, try adjusting the choke control to the full choke setting. When the engine is running, some machines feature a “start” mode that needs you to move the switch to a tiny I mode, so double-check these directions for your individual machine.

The next step is to turn on the ignition, which is signified by a huge “I” on the ignition switch. Depressing and holding Throttle Controlĭepress the throttle control after squeezing and holding it. Make sure no one else is in the vicinity of your weed eater’s whirling blades, which might cause an eye to fall out or slash skin and bone. If the trimmer line comes into contact with something foreign, it can be flung a considerable distance, and someone else must be at least 15 meters away by following the manufacturer’s safety standards.

The heads rotate swiftly as soon as you turn on your Stihl. When you use a weed eater, you have complete control over your surroundings.

Gas powered weed eaters made by Stihl use a gas-to-oil-to-fuel ratio of 50 to 1.īe sure to move your weed eater at least 3 meters away from other tanks or the area immediately adjacent to where you filled your fuel tank before turning it on. The fuel tank will need to be replenished if there isn’t enough gas in the tank. In order to check the fuel tank, remove the fuel cap and check if there is enough gasoline in the tank. The following is a step-by-step guide for starting the Stihl weed eater.

What is the reason for no spark on my Weed Eater? How To Start Stihl Weed Eater.

How come my Stihl weed eater won’t start?.

Depressing and holding Throttle Control.